DIY Kratom Capsules: Should You Make Them?

With more people hearing about Kratom and its potential therapeutic benefits, a growing number of people want to try it out. One of the most common ways to take Kratom is by ingesting capsules. Many Kratom vendors sell capsules, but you can also make your own. Outlined below is a bit about the differences between DIY Kratom capsules and the ones you can purchase at a vendor or an online store.

Kratom’s Traditional Uses

The ethnobotanical Kratom was used primarily by the indigenous communities of Southeast Asia. Here, there are dense forests where Kratom originates. The substance comes from the dried leaves collected off of the mitragyna speciosa tree. In these indigenous cultures, people would chew on the leaves to help promote focus, heighten productivity, and minimize discomfort. A tea was also made, which could produce similar effects as the hot water extracted the active compounds. While these methods of using Kratom may have been sufficient long ago, there are more straightforward formats for purchasing Kratom, one being DIY capsules.

Kratom’s Modern Forms

Kratom’s common form that you will see available in any store is a powder, as this is where all other products stem from. Once dried, the leaves from the tree are ground into this powder, which can then be turned into extracts, capsules, and tea. Capsules are a favorite form because of their convenience. You can easily store capsules and take them with you while still enjoying the potency and quality they deliver.

As modern culture demands that everyone lives busy, active lives, there is a need for health supplements that can be easily intertwined into life. For this reason, Kratom capsules are becoming a favorite. If you have empty capsules, you can make DIY capsules using the powder, but the process is not as straightforward as you would think.

Making Capsules In Modern Society

As most encapsulation machines used on an industrial level are relatively large and expensive, most Kratom enthusiasts will not use these for their DIY project, as they can easily buy already encapsulated Kratom. These machines work by feeding the capsule into a ring, splitting the capsule open, the substance or powder is pushed into the alternate halves, which are then pressed and sealed together. These machines can encapsulate hundreds within just a few minutes.

If you are going to opt for DIY Kratom capsules, there are a couple of ways that you can go about doing it. You can use your hands to fill the caps or use a tray manually. When you fill with your hands, you scoop the powder into the capsules and firmly seal them yourself. As you can easily spill and get the product on your hands, you may waste some of it. It also can take many hours to get the hang of the right technique.

If you are thinking about using a specialized tray, you take the tray and fill it with one-half of the capsules. There are usually many holes so you can get a batch done at once. You then pour your Kratom onto the tray and make sure that all the holes are filled. If there is extra left on the tray, you can use it for the next batch. You then take the tops to the capsules and close them all.

Typical Troubles With DIY Capsules

Purchasing capsules that have been manufactured professionally ensures that the product you are buying is safe and consistent. Every product undergoes intensive testing and quality control to ensure all customers get the best product possible.

DIY capsules often don’t reach the bar set by professionally made ones. It is hard to achieve consistency, and you may end up with a batch of capsules that are too full or too empty. As professionals rely on weight to make the perfect capsule, their product will always deliver you the correct dosage. If you are making these at home, many things can go wrong, and you won’t be getting the full benefit of Kratom.

If You Still Want to Make Your Own

If you must make your own capsules, you should always ensure that you take the proper steps to provide the best possible outcome. Start by choosing somewhere that is clean, and you have space to do the work. Ensure all the tools you are using have been cleaned so that there is no contamination with other products.

Once you have a clean area to work, research the optimal weight for each capsule. You can use this to determine how many capsules and how much Kratom to put in each. Once you determine the amount for each tablet, you can multiply this by the amount for each capsule, and you know that once you finish this amount and all the caps look equal, you are on the right track.

While you may think this method will work well for you, purchasing from a reputable Kratom vendor is the best way to get a premium product all the time. It is cost-effective because they sell potent products that are not contaminated.